;******************************************************************************
;Help.txt - help file
;
;Update history:
;01/10/94 MLO: created.
;01/10/94 JLE: added 1st draft of help text
;01/23/94 JLE: updated for personal netware
;02/11/94 JLE: added help for utilities
;02/16/94 JLE: security id left blank sets to default
;02/24/94 JLE: added directed site survey info
;03/02/94 JLE: help now matches Rev A of the manual
;06/17/94 MLO: updated help to reflect v1.9 changes
;06/20/94 JLE: added snoop, master search
;07/28/94 JLE: changed button names for Power Management, reworded for roaming
;11/03/94 JLE: rev'd for 2.3 changes
;04/18/95 MLO: updated for build utility compatibility
;06/22/95 MLO: merged ISA, PCMCIA, OEM helps
;07/07/95 JLE: rev'd for 3.02
;09/13/95 JLE: rev'd for 3.05
;09/18/95 JLE: changed descriptions on 3 new params
;09/19/95 JLE: made marketing's changes
;10/7/96 JLE: rev'd for V3.19
;11/22/96 JLE: rev'd for V3.20
;Format: 
;Semicolon in column 1 indicates comment
;HELPXXXX defines beginning of help section and terminates prior section
;Text should be limited to approximately 70 characters across.
;******************************************************************************
;
;Choose a Network Operating System
HELPNETW
Choose the driver type you will use with RangeLAN2.  This will
depend on the Network OS.  For example, NetWare environments usually
use an ODI driver.  Windows for Workgroups and LANtastic clients usually
use an NDIS driver.  TCP/IP packages often allow use of either an ODI
or NDIS driver.

You also need to indicate if the RangeLAN2 will be communicating
with only other RangeLAN2/ISA or RangeLAN2/PCMCIA cards
(i.e., Peer-to-Peer) or if they will be communicating through a
RangeLAN2/Access Point.

If you are installing a RangeLAN2/ISA card directly in a NetWare
file server, select NetWare Server.

Choose to either have the RangeLAN2 card auto-detected by the 
RL2Setup program or specify that you are using an ISA card or
a PCMCIA card.  

The auto-detection feature looks for the presence
of Card and Socket Services to determine that you are using
RangeLAN2/PCMCIA.  If you do not have Card and Socket Services,
do not attempt to auto-detect the RangeLAN2/PCMCIA card.  
Instead, manually choose PCMCIA.
;
;Main menu
HELPMAIN
You may use either a mouse or keyboard to make selections in 
RL2Setup.  If using a keyboard, press <Alt> followed by the
highlighted letter to make a selection.  Additionally, pressing <Enter> 
will invoke the currently highlighted button. 
Pressing the <Tab> key will cycle through the buttons displayed.
Pressing the <Esc> key takes you back to the previous menu without
saving changes.

For a first time installation, you should proceed through the 5 buttons 
in this order: <Network OS>, <Install Files>, <Configure>.  After the 
software has been installed and configured, choose the <Test / Utilities>
button.  After the initial installation, you may choose the 
<Test / Utilities> button to test the hardware and run the utilities 
without reconfiguring any of your previous selections.

<Network OS> allows you to select a Network Operating System and 
specify the network adapter type.  You may skip this button if you are 
satisfied with the selection you already made.

<Install Files> copies the utility files and prompts for copying the
RangeLAN2 driver files.  

<Configure> allows you to change the parameters for this 
computer.  It will allow you to change hardware, driver, and 
security settings.

<Test / Utilities> includes a diagnostic tool to test the hardware 
settings you chose, a site survey tool, a search for masters utility,
a snoop feature, and a tool to set more stringent security.
;
;Configuration with PCMCIA
HELPCPCM
RangeLAN2 requires one machine on the network be set up as the 
Master station.  This machine will set the spread spectrum frequency 
hopping sequence the other machines will follow.  

When there is no Master station present, a station configured as 
an Alternate Master station will become the Master for that session.

In most cases, you will use the default Station_Type setting.  However,
you may have reasons to change the default setting.  Here are some
criteria to use in determining how to set Station_Type:

1. In every wireless RangeLAN2 cell, at most one station must
   act as the Master Station.  If you need to set up additional 
   Master   stations, they should be configured as Alternate Master 
   stations so that there is only one true Master station on the 
   network.

2. The Master station must be within range of the other wireless 
   stations on the network.

3. In general, the RangeLAN2/Access Points are configured as 
   Master stations.  This configuration allows for roaming 
   capabilities of the clients.

4. If there is no RangeLAN2/Access Point on the network, the 
   RangeLAN2/ISA card in the server of a client-server network
   is usually configured as Master.  In a peer-to-peer network,
   one Master and at least one Alternate Master should be configured.
   The Alternate Master will take over Master functions in the 
   event that the Master station is unavailable.  Without a 
   RangeLAN2/Access Point, the clients will be unable to 
   perform roaming capabilities.

5. You will achieve better performance by configuring the fewest 
   number of machines possible as Masters or Alternate Masters.

Set the Port Address to an address you believe to be available in your
computer.  The default port address is 270.  Other options are 
100, 120, 140, 218, 280, 290, 298, 2A0, 2A8, 2E0, 300, 310, 358, 
360, and 368.

Set the IRQ to an interrupt level you believe to be available in your
computer.  The default IRQ is 5.  Other options are 3, 4, 7, 10, 11,
12 and 15.

To conserve battery life, the RangeLAN2 card has an inactivity
doze mode.  To activate it, check the Power Management box.  Then you
can choose the amount of time before Idle Shutdown (when the card has 
not sent or received data over the network) after which the doze mode 
is automatically engaged.  Once the card is dozing, it can be awakened 
by a Master station attempting to send data to it.  If this machine is
acting as the Master station, setting the Idle Shutdown time will 
have no effect.  The time before sleeping is calculated by adding
the Idle Shutdown minutes and seconds and rounding to the 
nearest second.

The <Use Defaults> button sets all the parameters to default settings.

The <Advanced> button is used to change advanced features of the driver.
You do not need to choose this button.
;
;Configuration with ISA
HELPCISA
RangeLAN2 requires one machine on the network be set up as the 
Master station.  This machine will set the spread spectrum frequency 
hopping sequence the other machines will follow.  

When there is no Master station present, a station configured as 
an Alternate Master station will become the Master for that session.

In most cases, you will use the default Station_Type setting.  However,
you may have reasons to change the default setting.  Here are some
criteria to use in determining how to set Station_Type:

1. In every wireless RangeLAN2 cell, at most one station must
   act as the Master Station.  If you need to set up additional 
   Master   stations, they should be configured as Alternate Master 
   stations so that there is only one true Master station on the 
   network.

2. The Master station must be within range of the other wireless 
   stations on the network.

3. The Master station should not be a station which will be moved 
   or turned off like a user's personal machine.  Since the machine 
   containing the RangeLAN2/ISA card is likely a non-mobile 
   machine, it may be a good candidate to be the Master.

4. In general, the RangeLAN2/Access Points are configured as 
   Master stations.  This configuration allows for roaming 
   capabilities of the clients.

5. If there is no RangeLAN2/Access Point on the network, the 
   RangeLAN2/ISA card in the server of a client-server network
   is usually configured as Master.  In a peer-to-peer network,
   one Master and at least one Alternate Master should be configured.
   The Alternate Master will take over Master functions in the 
   event that the Master station is unavailable.  Without a 
   RangeLAN2/Access Point, the clients will be unable to 
   perform roaming capabilities.

6. You will achieve better performance by configuring the fewest 
   number of machines possible as Masters or Alternate Masters.

Set the Port Address to an address you believe to be available in your
computer.  You will need to set the dip switch on the card to match
the selection you choose here.  The default port address is 270.  Other
options are 100, 120, 140, 218, 280, 290, 298, 2A0, 2A8, 2E0, 300, 310,
358, 360, and 368.

Set the IRQ to an interrupt level you believe to be available in your
computer.  The default IRQ is 15.  Other options are 3, 4, 7, 10, 11,
12 and 15.

The <Use Defaults> button sets all the parameters to default settings.

The <Advanced> button is used to change advanced features of the driver.
You do not need to choose this button.

If you are configuring a RangeLAN2/ISA in a NetWare file server,
all settings will be stored in a NET.CFG file in the root directory on
the RangeLAN2/ISA diskette.  You may wish to refer to these settings 
later when loading the RangeLAN2/ISA NetWare server driver.
;
;Configure with OEM
HELPCOEM
RangeLAN2 requires one machine on the network be set up as the 
Master station.  This machine will set the spread spectrum frequency 
hopping sequence the other machines will follow.  

When there is no Master station present, a station configured as 
an Alternate Master station will become the Master for that session.

In most cases, you will use the default Station_Type setting.  However,
you may have reasons to change the default setting.  Here are some
criteria to use in determining how to set Station_Type:

1. In every wireless RangeLAN2 cell, at most one station must
   act as the Master Station.  If you need to set up additional 
   Master   stations, they should be configured as Alternate Master 
   stations so that there is only one true Master station on the 
   network.

2. The Master station must be within range of the other wireless 
   stations on the network.

3. In general, the RangeLAN2/Access Points are configured as 
   Master stations.  This configuration allows for roaming 
   capabilities of the clients.

4. If there is no RangeLAN2/Access Point on the network, the 
   RangeLAN2/ISA card in the server of a client-server network
   is usually configured as Master.  In a peer-to-peer network,
   one Master and at least one Alternate Master should be configured.
   The Alternate Master will take over Master functions in the 
   event that the Master station is unavailable.  Without a 
   RangeLAN2/Access Point, the clients will be unable to 
   perform roaming capabilities.

5. You will achieve better performance by configuring the fewest 
   number of machines possible as Masters or Alternate Masters.

Set the Port Address to an address you believe to be available in your
computer.  The default port address is 270.  Other
options are 100, 120, 140, 218, 280, 290, 298, 2A0, 2A8, 2E0, 300, 310,
358, 360, and 368.

Set the IRQ to an interrupt level you believe to be available in your
computer.  The default IRQ is 15.  Other options are 3, 4, 7, 10, 11,
12 and 15.

The <Use Defaults> button sets all the parameters to default settings.

The <Advanced> button is used to change advanced features of the driver.
You do not need to choose this button.
;
;Advanced configuration with PCMCIA
HELPAPCM
Master_Name is an optional parameter of up to 11 characters
which specifies an alphanumeric name to simplify the 
identification of each acting Master in your network.  You may not have 
spaces in the name.  Master_Name only applies to machines configured 
as Master or Alternate Master.

Each Master can select one of 15 Channels to establish 
communications with Stations.  Each Channel number sets a 
unique frequency hopping sequence allowing for multiple subnetworks 
with higher data rate transmission capability in the same air space.  
You may think of the Channel as a pipe.  In order to communicate, 
radios must be on the same Channel and there must be one (and only one) 
Master that provides the timing for that Channel.  

There are 15 independent Channels designated 1 through 15 with 1 
being the default setting.  This means that there are 15 different 
sequences of frequency hops.  Each Channel is at a different frequency 
at a different time.  For networks with multiple Masters (like in a 
roaming environment), set each Master to a different channel for 
optimum performance.  All Stations will use the same channel as the 
Master they are synchronized to.

The Subchannel is a software code that is appended to each radio packet.  
It does not affect the frequency hopping sequence like a Channel does.  
Use a Subchannel if you need more than 15 Masters in the same coverage 
area and, therefore, all the Channels are used.

For example, you can use Channel 1, Subchannel 1 for Network A and 
Channel 1, Subchannel 2 for Network B.  The two networks will not 
communicate with one another.  They are, however, still sharing the 
1.6 Mbps pipe since they are both using Channel 1.

The Subchannels are designated 1 through 15 with 1 being the default 
setting.

In order to establish communications, all Station_types require the 
same Domain number.  Radios on different Domains cannot communicate with 
each other.  The Domain is a software filter which does not affect the 
actual radio frequency or the frequency hop sequence.

You may want to set everyone on your network to the same Domain.  
For larger wireless networks, use the Domain to establish roaming 
subnetworks throughout your building.  For example, the Engineering 
Department may use Domain 2 and the Sales Department may use Domain 5.  
Then engineers can only roam within the geographical area mapped out 
by RangeLAN2/Access Points with a Domain setting of 2.

The Domain is a number between 0 and 15 with 0 being the default setting.

The MAC_Optimize parameter helps improve throughput
for small networks.  If you have 8 or fewer wireless nodes
communicating with a RangeLAN2/Access Point at the same time,
set this parameter to Light.  (You can have more than 8 nodes
synchronized to a RangeLAN2/Access Point but only 8
or fewer communicating at the same time for the Light parameter
setting.)  In networks with more than 8 concurrent wireless users,
set the parameter to Normal.  The MAC_Optimize parameter is only set 
on Masters or Alternate Masters when they are the acting Master.

The Roam_Config parameter allows you to determine how quickly
stations will roam from one RangeLAN2/Access Point to
another.  In areas with many RangeLAN2/Access Points that
provide heavy overlapping coverage, set this paramter to Fast
to  maintain high throughput for each of the wireless nodes.

In most networks, set the Roam_Config parameter to Normal.  
Wireless node throughput will not change noticeably, and an
overabundance of RangeLAN2/Access Points is not required.

If the wireless coverage area provided by RangeLAN2/Access Points
is sparse, set the Roam_Config parameter to Slow.  Wireless
node will not roam under they are nearly out of range of the
RangeLAN2/Access Point to which they are synchronized, and
throughput will change as units' range changes.

If the Peer_to_Peer parameter box is checked, wireless clients
can communicate with one another.  If unchecked, the
wireless nodes will only communicate with the Master unit.
This results in a shorter synchronization time between the
wireless clients and the Master unit.  There are programs whose
timings are inappropriate for wireless networking, resulting
in the wireless nodes losing the network connection unless
this parameter box is unchecked. 

RangeLAN2/PCMCIA supports computers with either Card and Socket 
Services V2.1 or an Intel 82365SL PCMCIA controller chip.  By default,
the driver is set to work with Card and Socket Services.  However,
if this software is not detected, the driver will next look for an
Intel 82365SL chip.  If you want the driver to initialize this chip before
looking for Card and Socket Services, select this check box.

Memory Address selects the PCMCIA CIS memory space.

The Socket refers to the PCMCIA socket in which you have the 
RangeLAN2 card.  You may choose sockets A, B, C, or D.

The <Use Defaults> button sets all the parameters to default settings.
;
;Advanced configuration with ISA
HELPAISA
Master_Name is an optional parameter of up to 11 characters
which specifies an alphanumeric name to simplify the 
identification of each acting Master in your network.  You may not have 
spaces in the name.  Master_Name only applies to machines configured 
as Master or Alternate Master.

Each Master can select one of 15 Channels to establish 
communications with Stations.  Each Channel number sets a 
unique frequency hopping sequence allowing for multiple subnetworks 
with higher data rate transmission capability in the same air space.  
You may think of the Channel as a pipe.  In order to communicate, 
radios must be on the same Channel and there must be one (and only one) 
Master that provides the timing for that Channel.  

There are 15 independent Channels designated 1 through 15 with 1 
being the default setting.  This means that there are 15 different 
sequences of frequency hops.  Each Channel is at a different frequency 
at a different time.  For networks with multiple Masters (like in a 
roaming environment), set each Master to a different channel for 
optimum performance.  All Stations will use the same channel as the 
Master they are synchronized to.

The Subchannel is a software code that is appended to each radio packet.  
It does not affect the frequency hopping sequence like a Channel does.  
Use a Subchannel if you need more than 15 Masters in the same coverage 
area and, therefore, all the Channels are used.

For example, you can use Channel 1, Subchannel 1 for Network A and 
Channel 1, Subchannel 2 for Network B.  The two networks will not 
communicate with one another.  They are, however, still sharing the 
1.6 Mbps pipe since they are both using Channel 1.

The Subchannels are designated 1 through 15 with 1 being the default 
setting.

In order to establish communications, all Station_types require the 
same Domain number.  Radios on different Domains cannot communicate with 
each other.  The Domain is a software filter which does not affect the 
actual radio frequency or the frequency hop sequence.

You may want to set everyone on your network to the same Domain.  
For larger wireless networks, use the Domain to establish roaming 
subnetworks throughout your building.  For example, the Engineering 
Department may use Domain 2 and the Sales Department may use Domain 5.  
Then engineers can only roam within the geographical area mapped out 
by RangeLAN2/Access Points with a Domain setting of 2.

The Domain is a number between 0 and 15 with 0 being the default setting.

The MAC_Optimize parameter helps improve throughput
for small networks.  If you have 8 or fewer wireless nodes
communicating with a RangeLAN2/Access Point at the same time,
set this parameter to Light.  (You can have more than 8 nodes
synchronized to a RangeLAN2/Access Point but only 8
or fewer communicating at the same time for the Light parameter
setting.)  In networks with more than 8 concurrent wireless users,
set the parameter to Normal.  The MAC_Optimize parameter is only set 
on Masters or Alternate Masters when they are the acting Master.

The Roam_Config parameter allows you to determine how quickly
stations will roam from one RangeLAN2/Access Point to
another.  In areas with many RangeLAN2/Access Points that
provide heavy overlapping coverage, set this paramter to Fast
to  maintain high throughput for each of the wireless nodes.

In most networks, set the Roam_Config parameter to Normal.  
Wireless node throughput will not change noticeably, and an
overabundance of RangeLAN2/Access Points is not required.

If the wireless coverage area provided by RangeLAN2/Access Points
is sparse, set the Roam_Config parameter to Slow.  Wireless
node will not roam under they are nearly out of range of the
RangeLAN2/Access Point to which they are synchronized, and
throughput will change as units' range changes.

If the Peer_to_Peer parameter box is checked, wireless clients
can communicate with one another.  If unchecked, the
wireless nodes will only communicate with the Master unit.
This results in a shorter synchronization time between the
wireless clients and the Master unit.  There are programs whose
timings are inappropriate for wireless networking, resulting
in the wireless nodes losing the network connection unless
this parameter box is unchecked.

The <Use Defaults> button sets all the parameters to default settings.
;
;Advanced configuration with OEM
HELPAOEM
Master_Name is an optional parameter of up to 11 characters
which specifies an alphanumeric name to simplify the 
identification of each acting Master in your network.  You may not have 
spaces in the name.  Master_Name only applies to machines configured 
as Master or Alternate Master.

Each Master can select one of 15 Channels to establish 
communications with Stations.  Each Channel number sets a 
unique frequency hopping sequence allowing for multiple subnetworks 
with higher data rate transmission capability in the same air space.  
You may think of the Channel as a pipe.  In order to communicate, 
radios must be on the same Channel and there must be one (and only one) 
Master that provides the timing for that Channel.  

There are 15 independent Channels designated 1 through 15 with 1 
being the default setting.  This means that there are 15 different 
sequences of frequency hops.  Each Channel is at a different frequency 
at a different time.  For networks with multiple Masters (like in a 
roaming environment), set each Master to a different channel for 
optimum performance.  All Stations will use the same channel as the 
Master they are synchronized to.

The Subchannel is a software code that is appended to each radio packet.  
It does not affect the frequency hopping sequence like a Channel does.  
Use a Subchannel if you need more than 15 Masters in the same coverage 
area and, therefore, all the Channels are used.

For example, you can use Channel 1, Subchannel 1 for Network A and 
Channel 1, Subchannel 2 for Network B.  The two networks will not 
communicate with one another.  They are, however, still sharing the 
1.6 Mbps pipe since they are both using Channel 1.

The Subchannels are designated 1 through 15 with 1 being the default 
setting.

In order to establish communications, all Station_types require the 
same Domain number.  Radios on different Domains cannot communicate with 
each other.  The Domain is a software filter which does not affect the 
actual radio frequency or the frequency hop sequence.

You may want to set everyone on your network to the same Domain.  
For larger wireless networks, use the Domain to establish roaming 
subnetworks throughout your building.  For example, the Engineering 
Department may use Domain 2 and the Sales Department may use Domain 5.  
Then engineers can only roam within the geographical area mapped out 
by RangeLAN2/Access Points with a Domain setting of 2.

The Domain is a number between 0 and 15 with 0 being the default setting.

The MAC_Optimize parameter helps improve throughput
for small networks.  If you have 8 or fewer wireless nodes
communicating with a RangeLAN2/Access Point at the same time,
set this parameter to Light.  (You can have more than 8 nodes
synchronized to a RangeLAN2/Access Point but only 8
or fewer communicating at the same time for the Light parameter
setting.)  In networks with more than 8 concurrent wireless users,
set the parameter to Normal.  The MAC_Optimize parameter is only set 
on Masters or Alternate Masters when they are the acting Master.

The Roam_Config parameter allows you to determine how quickly
stations will roam from one RangeLAN2/Access Point to
another.  In areas with many RangeLAN2/Access Points that
provide heavy overlapping coverage, set this paramter to Fast
to  maintain high throughput for each of the wireless nodes.

In most networks, set the Roam_Config parameter to Normal.  
Wireless node throughput will not change noticeably, and an
overabundance of RangeLAN2/Access Points is not required.

If the wireless coverage area provided by RangeLAN2/Access Points
is sparse, set the Roam_Config parameter to Slow.  Wireless
node will not roam under they are nearly out of range of the
RangeLAN2/Access Point to which they are synchronized, and
throughput will change as units' range changes.

If the Peer_to_Peer parameter box is checked, wireless clients
can communicate with one another.  If unchecked, the
wireless nodes will only communicate with the Master unit.
This results in a shorter synchronization time between the
wireless clients and the Master unit.  There are programs whose
timings are inappropriate for wireless networking, resulting
in the wireless nodes losing the network connection unless
this parameter box is unchecked.

The <Use Defaults> button sets all the parameters to default settings.
;
;Utility Help
HELPUTIL
When you choose the <Test / Utilities> button, the software searches 
for the RangeLAN2 hardware.  If the card is found, you will 
be able to continue to use the <Site Survey>, <Masters>, <Snoop>, 
and <Set Security ID> buttons.  If the card is not found, you will 
see an error message.

Performing a site survey may help you decide where to place your
Master station.  Choose the <Site Survey> button to read the Link 
Quality and Signal Strengths of the other RangeLAN2 products 
on the network.

If you use the Roaming feature of the RangeLAN2 family, you may be
interested in knowing which Master stations are within range.   
Master stations within range are displayed along with their Domain,
Channel, Subchannel, and Master_name.  You will only be able to roam to
RangeLAN2/Access Points set as Master stations that are on the same
domain as the RangeLAN2 card.

If you want to see the activity in the frequency band in which
RangeLAN2 operates, you may want to "snoop" this band.

As an added security measure, RangeLAN2 allows you to set a 
security ID for each RangeLAN2 card installed on a network.  ALL CARDS
MUST HAVE MATCHING SECURITY IDS IN ORDER TO COMMUNICATE.  To change the
Security ID back to default settings, leave the Security ID field
blank and choose <OK>.

A Technical Support Representative may ask for information from the 
<Get Settings> button.

Choose <Done> to leave this screen. 
;
;Site Survey Help
HELPSITE
There are four columns of data:

Node address lists the RangeLAN2 card's node address/serial number.
The Master station is always listed first with its node address and
Master_name unless this unit is the acting Master.

The higher the Link Quality number from a particular node, the greater 
the link.  A Link Quality number of 0 indicates that the node is
no longer responding at all. This is the most important parameter to
watch to verify that you will be able to maintain a reliable 
wireless connection.

An asterisk in the Activity colum indicates that the last packet
sent was answered.  The lack of an asterisk  means the receiving unit 
did not respond to the packet.

Received signal strength indicates how strong a signal was received
from a particular node.

If you check the Roaming Enabled box, you can roam about your environment
and as you leave the range of one Master, the site survey will continue
as you seamlessly re-synchronize to another Master.

You can sort the listed units by node address or by order of arrival 
of the packets.  Additionally, the bottom of the screen shows how many 
units responded to this site survey, meaning how many are
within range and on the same Domain and Security ID as this unit.

You may check the link between this machine and other
displayed nodes by a click of the mouse on the node address, 
or by tabbing until the node address is highlighted and press 
the <Spacebar>.  If you choose to check the link with another
unit, it may decrease the performance of that unit.

;Directed Site Survey Help
HELPSDIR
For this node, you may vary the size of the packets that are being
transmitted, and then watch the changes in packets per second, bytes
per second, and received signal strength.

The Transmit Packet Latency shows how long it took before a packet was
actually transmitted from the RangeLAN2.

The Elapsed Time indicates how long the Directed Link has been
running.

The Average values represent the average of Packets per Second, Bytes
per Second, and Latency in milliseconds during the time listed in 
Elapsed Seconds.

;Site Survey Masters List Help
HELPMSTR
All Master stations within range of the surveying machine are displayed.
Choose to search all Domains or only one specific Domain.

To synchronize to a Master, select it by a click of the mouse
or tab until the Master is highlighted.

Then press the <Use Domain> button to reconfigure this unit to 
synchronize to that Master.  The configuration file will be also updated.

Press the <Test Link> button to check the quality of the link to that 
Master.

;Site Survey Snoop Help
HELPSNOP
Both the peak and average activity levels on the different frequencies
are displayed.  In addition, a mark is left indicating the highest
level of activity on a given frequency.

If there are no other RangeLAN2 products running in an area, 
bars indicate potential sources of interference.  If there are
other RangeLAN2 products running in the area, you will see
the frequency hops.

