; Adapter Description File for the Ungermann-Bass NIUps AdapterID 07012h AdapterName "Net/One NIUps LAN Adapter" NumBytes 4 FixedResources Pos[2]=xx00xxxxb NamedItem Prompt "NIUps Enable/Disable" Choice "NIUps Enabled" Pos[0]=xxxxxxx1b Choice "NIUps Disabled" Pos[0]=xxxxxxx0b Help "This controls whether or not the NIUps is enabled. Under normal circumstances, select 'NIUps Enabled'." NamedItem Prompt "Shared RAM PS/2 Memory Address Range" Choice "C8000-CFFFF (32K RAM)" Pos[0]=x00xxxxxb Pos[1]=xxxx0010b Mem 0C8000h-0CFFFFh Choice "D8000-DFFFF (32K RAM)" Pos[0]=x00xxxxxb Pos[1]=xxxx0110b Mem 0D8000h-0DFFFFh Choice "C8000-CBFFF (16K RAM)" Pos[0]=x10xxxxxb Pos[1]=xxxx0010b Mem 0C8000h-0CBFFFh Choice "CC000-CFFFF (16K RAM)" Pos[0]=x10xxxxxb Pos[1]=xxxx0011b Mem 0CC000h-0CFFFFh Choice "D8000-DBFFF (16K RAM)" Pos[0]=x10xxxxxb Pos[1]=xxxx0110b Mem 0D8000h-0DBFFFh Choice "DC000-DFFFF (16K RAM)" Pos[0]=x10xxxxxb Pos[1]=xxxx0111b Mem 0DC000h-0DFFFFh Help "Choose the range of PS/2 memory addresses the NIUps will use for its 16K or 32K of shared RAM. Under normal circumstances, 'C8000-CFFFF (32K RAM)' is suggested. Note that most standard Net/One software requires selection of one of the 32K choices." NamedItem Prompt "I/O Port Address Range" Choice "I/O ports 350-357" Pos[3]=xxxx0000b IO 350h-357h Choice "I/O ports 358-35F" Pos[3]=xxxx0010b IO 358h-35Fh Choice "I/O ports 360-367" Pos[3]=xxxx0100b IO 360h-367h Choice "I/O ports 368-36F" Pos[3]=xxxx0110b IO 368h-36Fh Help "Choose the range of PS/2 I/O addresses the NIUps will use for its eight I/O ports. There are four ranges that can be selected. Under normal circumstances, 'I/O ports 360-367' is suggested." NamedItem Prompt "Interrupt Level" Choice "IRQ3" Pos[0]=0xxxxxxxb INT 3 Choice "IRQ12" Pos[0]=1xxxxxxxb INT 12 Help "This selects the PS/2 interrupt at which the NIUps will operate. Under normal circumstances, 'IRQ3' is suggested." NamedItem Prompt "IPL Mode" Choice "Local IPL (via LOADNIU)" Pos[0]=xxx00xxxb Choice "Optional Remote IPL with query" Pos[0]=xxx01xxxb Choice "Automatic Remote IPL: no query" Pos[0]=xxx11xxxb Help "Select whether the NIUps should boot (IPL) locally via user invokation of the 'LOADNIU' program, or remotely via a boot request on the network to be serviced by a Net/One Boot Server. If Remote IPL is chosen then select either IPL with query (where the user may choose Local or Remote IPL at boot time), or Automatic IPL with no query (where Remote IPL occurs without user intervention). Under normal circumstances, 'Local IPL (via LOADNIU)' is suggested." NamedItem Prompt "Remote IPL PS/2 Memory Address Range" Choice "N/A (Local IPL)" Pos[0]=xxx00xxxb Choice "C8000-C9FFF" Pos[1]=x010xxxxb Mem 0C8000h-0C9FFFh Choice "CC000-CDFFF" Pos[1]=x011xxxxb Mem 0CC000h-0CDFFFh Choice "D8000-D9FFF" Pos[1]=x110xxxxb Mem 0D8000h-0D9FFFh Choice "DC000-DDFFF" Pos[1]=x111xxxxb Mem 0DC000h-0DDFFFh Help "If Remote IPL was chosen, then also choose the range of PS/2 memory addresses the NIUps will use for its 8K Remote IPL window. If Local IPL was chosen then select 'N/A (Local IPL)'. For Remote IPL, 'CC000-CDFFF' is suggested. If 3270 Emulation is selected with Remote IPL then the IPL window will be fixed at CC000-CDFFF, with the 3270 window at CE000-CFFFF." NamedItem Prompt "3270 Emulation" Choice "Disabled" Pos[0]=xxxxx0xxb Choice "Enabled" Pos[0]=xxxxx1xxb ; Pos[1]=x011xxxxb ; Mem 0CE000h-0CFFFFh ; IO 2D0h-2DFh ; INT 9 Help "This controls whether or not NIUps 3270 Emulation is enabled. If 3270 Emulation is not desired then choose 'Disabled'. If 3270 Emulation is desired, then choose 'Enabled'. If 3270 Emulation is selected then the 3270 8k window will be at CE000-CFFFF and the 3270 I/O ports will be 2D0h-2DFh. Also, if 3270 Emulation is selected with Remote IPL then the IPL window will be fixed at CC000-CDFFF, with the 3270 window at CE000-CFFFF. Under normal circumstances (with no 3270 Emulation), select 'Disabled'." NamedItem Prompt "IRMA Emulation" Choice "Disabled" Pos[0]=xxxxxx0xb Choice "Enabled: I/O ports 220-22F" Pos[0]=xxxxxx1xb Pos[2]=xxxx1000b IO 220h-22Fh Help "This controls whether or not NIUps IRMA Emulation is enabled. If IRMA Emulation is not desired then choose 'Disabled'. If IRMA Emulation is desired, then choose 'Enabled' (the IRMA I/O ports will be 220h-22Fh). Under normal circumstances (with no IRMA Emulation), select 'Disabled'."